| Housing Included | Yes |
| Housing Material | Aluminum |
| Mounting Hole Quantity | 4 |
| Is Prop Sixty Five Affected | No |
| Is the item CARB affected | No |
| Terminal Gender | Male |
| Sensor Type | Resistor |
| Connector Quantity | 1 |
| FAQs | What goes bad in VANE AIRFLOW type units? |
| Universal Or Specific Fit | Specific |
| Is Or Contains A Battery | No |
| Product Condition | Remanufactured |
| Color | Gray |
| Terminal Type | Pin |
| Contains Electronic Components? | Circuit Board |
| FAA_A4 | The most common causes are: a worn vane assembly, a cracked housing, or a cracked printed circuit board. These conditions all require unit replacement. |
| FAA_A5 | The most common causes are: cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating, or loose printed circuit board components. |
| Connector Shape | Oval |
| Mounting Type | Bolt-On; Hose Clamp |
| FAA_A2 | Visually inspect the sensor element in the MAF for damage or for a burnt smell. In the VANE AIRFLOW sensor, inspect the door for binding or for a burnt smell. Check for diagnostic trouble codes with a scanner. |
| FAA_A3 | Over-voltage sources from relays, short circuited wiring, cracked printed circuit boards, moisture entering the unit through split air ducts, electrical connections and wiring, air intake obstructions or gas/oil fumes from the engine can cause failure. Check air filter and air ways for dirt or debris. Check for loose or faulty connectors and broken or faulty wiring. Be sure to check these to prevent damage to the replacement unit. |
| FAA_A1 | A malfunctioning MAF/VANE air flow sensor can cause any one or more of the following symptoms: hesitation, stalling, poor fuel economy or poor engine performance. |
| Prop 65 | NO |
| E-Waste | Yes |
| Is Item A Chemical | No |
| Wiring Harness Included | No |
| FAQ_Q5 | What goes bad in MAF sensors? |
| FAQ_Q4 | What goes bad in vane air flow type units? |
| Features and Benefits | Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle's engine control management system. |
| Is or contains a bulb? | No |
| FAQ_Q1 | How can a malfunctioning MAF/VANE air flow sensor affect my vehicles' operation? |
| FAQ_Q3 | What are the most common causes of MAF/VANE air flow sensor problems? |
| FAQ_Q2 | How can I determine if the MAF/VANE air flow sensor is bad? |
| Mounting Bracket Included | No |
| Package Contents | Mass Air Flow Sensor; Instruction Sheet |
| Does it require SDS | No |
| First Application Year | 1993 |
| Terminal Quantity | 4 |
| Is item a chemical? | No |
| SDS Required | No |
| Bracket Included | No |
| Is the item CARB affected? | No |
| Connector Gender | Male |
| Mounting Hardware Included | No |
| Is Or Contains A Bulb | No |
| Is or contains a battery? | No |
| Housing Color | Gray |
| Contains Electronic Components | Circuit Board |
| Outlet Connection Diameter | 3.3 |
| Grade Type | Regular |
| Part Terminology | Mass Air Flow Sensor |
