Error Storing Vehicle
directions_car close
keyboard_arrow_left
Go back  
keyboard_arrow_right
American thunder cat back exhaust system
Part # 817602 | Line Code: FLO
Flowmaster
Flowmaster

$995.95
$995.95
error
Not Fitted
block
Shipping Not Available

Product Details
expand_less
muffler part number Kit Only
WARNING CA Proposition 65 Yes
Bullet Point #1 Stainless Steel Construction
muffler series 50 Series HD
Bullet Point #2 Dyno Tuned For Maximum Performance
Tip Type Double Wall
Bullet Point #3 Patented Delta Flow technology
Tip Logo Embossed
Bullet Point #4 Made in the USA
Tip Diameter 3.500 in.
Tail Pipe Quantity 2
Tip Cut Angle
California Proposition 65 Chemical Name Nickel (Metallic)
Heat Shield Attached No
Catalytic Converter Quantity No
Muffler Count 1
Prop 65 (C, R or CR) CR
California Proposition 65 Chemical Name 1 Nickel (metallic)
Tip Finish Polished
Muffler Outlet Diameter 2.500 in.
single dual Dual
Sound Level Moderate
Outlet Outside Diameter 2.500 in.
California Proposition 65 Chemical Name 2 Chromium (hexavalent compounds)
Muffler Body Material 409S Stainless Steel
Emission Code 5
WARNING CA Proposition 65 Message WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Prop 65 Yes/No Yes
Muffler Inlet Outside Diameter 3.5
Muffler Quantity 1
Muffler Inlet Diameter 3.500 in.
Tip Diameter (in) 3.5
Tip Material 304 Stainless
Tubing Diameter 2.500 in.
tip length 13.000 in.
Exhaust Type Dual
Tail Pipe Diameter 2.500 in.
Tip Style Double wall
Muffler Type Welded Baffle
Muffler Outlet Diameter (in) 2.5
Pipe Material 409S Stainless Steel
Tip Length (in) 13
Exit Position DOR/S
heat shield No
Muffler Body Shape Oval
Muffler Finish Gray
Prop 65 - Short Label prop65_warning.jpg
Mount Type Uses Factory Hangers
Emission Code Description Part does not affect Vehicle Emissions
Single or Dual Dual
Exit Style Straight
System Type Cat-back
Title Flowmaster 817602 Cat-Back System 409S - DOR/S - American Thunder - Moderate Sound
Material 409 Stainless Steel
exhaust series American Thunder
Tail Pipe Outlet Outside Diameter 2.5
Inlet Inside Diameter 3.500 in.
Tip Edge Style Cut
Tip Shape Round
Part Terminology Exhaust System Kit

Features & Benefits
expand_more
The American Thunder Cat-back exhaust system for 2011-2018 Chevrolet Silverado and GMC Sierra 1500 trucks with the 6.2L engine, is perfect for the person looking for an aggressive exterior sound level while maintaining a moderate interior tone. This bolt-on stainless steel system features a 3.50-inch mandrel-bent inlet pipe flowing into the 50 Series HD performance muffler with large 4.00-inch internals and a built-in tuned resonance chamber to minimize interior drone. The system has dual 2.50-inch mandrel-bent tailpipes which use the factory hanger locations and are finished off with large 3.50-inch polished stainless steel tips. This exhaust system gives you choices for tailpipe exit location either out each side behind the rear tires if you do a lot of towing, or straight-out under the rear bumper for a muscular look. The exhaust system is covered by our Lifetime Limited Warranty and includes all necessary parts and hardware for easy installation you can do at home. Note: Fits 2/4 WD model with Crew Cab/Short Bed (143.5 in. WB), Crew Cab/Standard Bed (153 in. WB) and Double Cab/Standard Bed (143.5 in. WB).

Application Summary
expand_more

2011-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 Crew Cab and Double Cab models with 6.2L V8 gas engine.
Parts Catalog
keyboard_arrow_upBack to Top