| Pulley Included | No |
| Remote Reservoir | Yes |
| Power Steering Pump Outlet Quantity | 1 |
| Product Condition | Remanufactured |
| Housing Material | Cast Iron |
| Power Steering Pump Inlet Attachement Type | Hose Barb |
| Mounting Hardware Included | No |
| Pulley Attachement Type | Press-On |
| Package Contents | Pump, O-Ring, Reservoir, Instruction Sheet |
| Power Steering Pump Outlet Attachment Type | Threaded |
| First Application Year | 1991 |
| Power Steering Outlet Thread Size | M16 x 1.5 |
| Power Steering Reservoir Cap Included | No |
| Reservoir Included | Yes |
| E-Waste | No |
| Hose Port Type | O-Ring |
| FAQs | Most likely cause is contamination. Remove the pressure hose and pressure fitting on the power steering pump. Remove the flow control valve and spring. Clean the valve and check the valve bore for damage. Reinstall the spring, valve, fitting and hose. Flush and bleed system and re-test. If okay, install power steering filter to prevent problem from re-occurring. |
| Part Terminology | Power Steering Pump |
