1 gal Metal Coating
Corlar 2.1-ST is a high gloss, high build epoxy mastic, two-package, VOC conforming product (2.1 lbs/gal)* based on DuPont amido amine modified polyamide epoxy technology.
The resulting highly durable coating delivers outstanding corrosion and chemical resistance. As a high performance direct-to-metal (DTM) coating or topcoat on carbon steel, galvanized steel, stainless steel, aluminum, concrete, concrete block and wood where:
- Rusted, hand or power-tool cleaned surfaces must be protected
- Single coat applications up to 10 mils dry film thickness are required
- Application will be made over damp surfaces and/or under conditions of high relative humidity
- Excellent resistance to chemical and/or marine environments is required
- Outstanding abrasion resistance and edge protection are required
- Application by brush and roller, in addition to spraying, may be necessary
- Application must be made at temperatures as low as 35F
- No induction time and long pot life will improve productivity
Corlar 2.1-ST may also be used as a high performance tank lining on carbon steel or concrete for immersion service in near neutral pH water, fresh water, or saltwater. Corlar 2.1-ST is not recommended for use with potable water.
Color | White |
Weight | 14.4 |
Size | 1 gal |
Brand | Axalta |
Part Number | LF63226P01 |
Line Code | DUP |
UPC | 012500155890 |
Terminology | Metal Coating |
Size | 1 gal |
Weight | 14.4 |
For warranty information please contact
Auto-Wares.